New type icing gear covered in ice

It came out last year and shocked the industry.

# 107 SERIES RENEWAL

PRODUCT About the product
PRODUCT About the product

#107SERIES

RENEWAL
Cooling Peltier exclusive inner vest

High-level cooling function that of -22°C above the ambient temperature in about 10 seconds

A new type of cooling wear that has Peltier devices with a diameter of 5 cm installed in three locations, on the back neck and on both sides. The area that comes in contact with the device exhibits a high-level cooling function of up to 22°C below the ambient temperature in about 10 seconds after turning on the power. By cooling the arteries, it effectively cools down the entire body, reduces fatigue during intense heat, and is expected to be a countermeasure against heatstroke.

01

battery storage pocket

02

Fits your body with stretch material and adjustment buttons

03

Side pocket for smartphone

04

Three Peltier devices provide
a cooling effect of about 20°C below the ambient temperature.

The device mounting cap uses a new structure to reduce falling. The device shape is patented and realizes improved cooling temperature specifications.

Peltier device can be easily removed. There is no problem with washing clothes as usual.

PERFORMANCE

Equipped with a new fluctuation mode that makes it easier to experience the cooling effect

Equipped with a fluctuation mode (10 minutes on, 2 minutes off) to avoid cold sensation paralysis caused by the body getting used to long-term use. You can repeatedly experience the fresh cooling sensation and increase the continuous operation time by 30 minutes.

■ Surface temperature when worn

After about 10 minutes

*Please avoid direct contact with your skin as it may cause abnormalities on your skin.

DEVICE About devices

COOLING PELTIER DEVICE
controller

#PS100 (Type 3) 3-piece Peltier device Basic specifications
Power supply 5V (2.2A or more) Mobile battery
temperature switching 4-stage
contact surface cooling temperature & continuous operation time
(fluctuation mode) Up to about 22℃ below the environmental temperature (surface Cooling max. 7℃) Approximately 3 hours

#PS101 (Type 4) 4-piece Peltier device Basic specifications
Power supply used 5V PD3.0A compatible mobile battery
Temperature switching 4-stage
contact surface cooling temperature & continuous operation time
strong (fluctuation mode) Up to about 22℃ below the environmental temperature (surface cooling Maximum 7℃) Approximately 3 hours

 
I'Z ORIGINAL MOBILE BATTERY
input/output port
battery capacity 3.7V 10000mAh (37Wh)
Rated capacity 5V 6100mAh (30.5Wh)
Input rating micro 5V/2A 9V/2.0A
USB-C 5V/3A 9V/2.0A 12V/1.5A
Output rating USB-A 5V/3A 9V/2.0A 12V/1.5A
USB-C 5V/3A 9V/2.22A 12V/1.67A

Body size: H16.2 x W69 x L141 (mm)
Mass: Approx. 225g (Main body)
Included cable Type-A – Type-C
Charging time (estimate) Normal adapter 5V Approx. 5 hours PD compatible adapter Approx. 3 hours

*Caution* For any quality defects or troubles, please contact the manufacturer, Libre Co., Ltd.

DESIGN

DESIGN

Lineup of advanced sporty designs that can be selected depending on the scene

Three types of materials are used to achieve a high sense of hold. It has a sporty look and can be used as outerwear.

The side part is equipped with an adjuster button that measures the waist circumference by minus 4cm to enhance the fit.
The double slider zipper, dot buttons, etc. are made in Japan by YKK. We pay attention to quality down to the smallest detail.

Experience more cooling effect

Compression developed specifically for cooling Peltier devices

Coordinating with our Peltier device compatible compression wear #215 series further improves cooling sensation. It also goes great when layered with fan-equipped clothing for even more comfort.

#215/#218

VIEW MORE
*Caution* For any quality defects or troubles, please contact the manufacturer, Libre Co., Ltd.

LINEUP Lineup introduction

uniform type

#3128SERIES

that can be used as a corporate uniform .
Add comfort to your summer work environment.

VIEW MORE

Hard use high spec outerwear

# 100 SERIES # 104 SERIES

A high spec model that can also be used with a full harness.
It shows its true value not only in work but also in the motorcycle scene.

VIEW MORE

Normal polo shirt

#125SERIES

that can be used
not only for uniforms but also for golf and other situations .

VIEW MORE

High spec active vest

#106SERIES


An outer/inner model that can be used not only for work, but also for cycling, touring, and

VIEW MORE

inner vest

#107SERIES

The best coordination is layered with clothing with fans.
An inner model that changed the history of the industry.

VIEW MORE

Dedicated inner compression

# 215 SERIES # 218 SERIES


Special innerwear developed with a focus on maximizing the functionality of the Peltier device

VIEW MORE